From maintenance products to Speciality Lubricants – OKS products stand for intelligent solutions for critical application conditions. Close collaboration between their development and production departments means that OKS can quickly implement new technologies in market-ready products. The increase in efficiency of their lubricants through use of synthetic oils and high-performance additives as well as the development of a comprehensive range of dry lubricants are examples of our specialists`competence. OKS products come from a single source, since their lubricants do not only solve your tribological problems securely and reliably, they also offer your significant cost benefits through their efficiency and cost-effectiveness.

Over 150 high-performance products from one supplier

• Pastes for easy assembly and dismantling
• Oils with high-performance additives for reliable lubrication
• Greases for long-term lubrication under critical operation conditions
• Dry lubricants – the alternative for special application cases
• Corrosion protection for reliable preservation during storage and shipping
• Maintenance products for ongoing service
• Cleaners for thorough removal of soiling and lubricant residues
  
  

Dry lubricants

Product Designation Fields of Application Purpose OKS 110/111 MoS2 Powder, high degree of purity Run-in lubricant in combination with oils or greases. Prevents friction and wear, even at high pressures. Good adhesion, even at extremely precision-machined surfaces. For difficult moulding processes. For pressing in bearings. OKS 1300/1301 Sliding Film, colourless Thread coating. Sliding film for plastic, wood and metal. Dry sliding film fast to handling with UV indicator. Prevents seizing. For all screw materials. Broad range of uses, in particular for precoating small and mass-produced parts. OKS 491 Open Gear Spray, dry Dry lubrication of slowly-turning, open pinion gears, steel cables etc. subjected to high pressures, dust or corrosive influences, such as outdoor weathering. Reduces friction and wear. Prevents adhesion of dust and dirt. OKS 510/511 MoS2 Bonded Coating, fast-drying Dry lubrication for temporary operation or long downtimes, in dusty environments and at low sliding speeds. Run-in lubricant in combination with oils or greases. Creates emergency-running properties. Dries at room temperature. OKS 570/571 PTFE Bonded Coating Dry lubrication of sliding surfaces of different materials at low pressures, low speeds and in dusty environments. Colourless, no-soiling sliding and parting film. Prevents tribocorrosion, Dries at room temperature.

Paste - For easy assembly and dismantling

Product Designation Fields of Application Purpose OKS 220/221 MoS2 Rapid Paste Assembly lubrication for press-on processes. Run-in lubrication of highly loaded sliding surfaces. Lubricant for difficult moulding processes. Immediately effective due to high percentage of MoS2, no rubbing in of paste necessary. High-quality assembly paste. OKS 230 MoS2 High-Temperature Paste For high-temperature applications up to 450°C (dry lubrication from approx. 200°C). Prevents wearing, stick-slip, seizing, run-in damage, pitting. Carrier oil evaporates residue-free from 200°C upwards. Bearings of pouring ladies, converters, kiln cars, or similar. Relubrication is operation with OKS 310. OKS 235 Aluminium Paste, Anti-Seize Paste For assembling screw and bolt threaded connections that are subjected to high temperatures and corrosive influences. Optimum ratio screw tightening torque or rusting on. Prevents burning together. Lubricating and separating paste. OKS 240/241 Antiseize Paste (Copper Paste) For assembling screw threaded connections subjected to high temperatures and corrosive influences. Prevents burning together or rusting on. Optimum ratio of screw tightening torque to achievable pre-tension. Classic anti-seize paste.

Oils - With high performance additives for reliable lubrication

Product Designation Fields of Application Purpose OKS 450/451 Chain Lubricant, Transparent ISO VG 230 DIN 51 502: CLP X 320 For fast-running chains and other machine elements subjected to high pressures or corrosive influences. Extremely high creep capacity. Highly adhesive. Resistant to throwing off. Excellent wear protection. Waterproof. For lubricating flexible drives. OKS 600/601 Multi Oil ISO VG 7 class DIN 51 502: C 7 Low-viscosity multipurpose oil. Extremely high creep capacity. Dismantling rusted-in parts. Good lubricating properties. Displaces moisture. For cleaning and care of metal surfaces. Protects electrical contacts. For industry, workshop and hobby applications.

Maintenance Products

Product Designation Fields of Application Purpose OKS 1360/1361 Silicone Release Agent Combines highly effective parting and lubricating agent with antistatic properties. Chemically neutral. Solvent-free. OKS 2661 Fast Cleaner High cleaning ability, evaporates fast and residue-free. OKS 2800/2801 Leak Detector Saves energy and warns of gas loss as even smallest leaks become immediately visible by formation of bubbles at the leaking spot. OKS 2901 Belt Tuning Increases performance – up to 50% more belt tension. Strongly adhesive – stops belt slip. Prevents drying out – rises lifetime. Universal – for all V, round and flat belts.